Flow sight glass type 531 with welding end connections

SHORT DESCRIPTION - FLOW SIGHT GLASS TYPE 531 WITH WELDING ENDS

The ACI flow sight glass type 531 uses the same tested basic construction as Type 530 and is therefore significantly lighter than comparable fittings with a cast housing. As with Type 530, only high-quality materials are used in a process that is tightly controlled from issuing the offer to delivery, to ensure that the fitting fulfils your requirements.

The viewing windows facing each other of Type 531 allow the observation and illumination of the flowing medium and in the standard configuration consist of the proven borosilicate glass according to the norm DIN 7080. If this highly resistant glass is not adequate, we can manufacture special glasses made of quartz or sapphire especially for your requirements.

Sealing is provided by quality gaskets from well-known suppliers, which we select according to the requirements of your individual use. Apart from widespread aramid fibre material seals such as KlingerSIL C4400, we also use seal plates made of graphite with or without metal insert, pure or expanded PTFE, or in extreme operating conditions also mica compound seals.

Contact our teams of experts with your requirements and let us advise you about the possibilities that our product range offers for your system.

See further below for detailed technical information and product video.

Technical data

Material:

Body made of: 1.4571, 1.4541, 1.4404, P235GH, P265GH

Screws:
A4-70

Glass plates:
- Borosilicate glass DIN 7080
- Soda lime glass DIN 8902
- quartz glass
- METAGLAS

Gasket:
graphite (other materials available)

Shape:

straight flow sight glasses with welding ends


Nominal size:

DN50- DN40


Nominal pressure:

PN10 up to PN 63

Temperature:

280 ° C with borosilicate glass to DIN 7080
150 ° C with soda lime glass DIN 8902
up to 500 ° with quartz

Request an offer
+49 (0) 2461 91634 00
info@aci24.com
Offer request
Data sheet download
Productvideo
Collapse