Wafer type - Butterfly valve Type 22.012 | ACI Industriearmaturen GmbH

Wafer type Butterfly valve Type 22.012 - PN6 / 10 / 16

Maintenance-free soft-seated wafer butterfly valve with centring lugs, face-to-face length (DIN 3202 T3, series K1) DIN EN 558-1, basic series 20, body made of cast iron EN-JS1030 (short designation: EN-GJS-400-15, eh. GGG-40), with primer coat, EPDM, NBR or VITON sealing sleeve, from -10 degrees C to +130 degrees C, (depending on gasket selection) disc made of stainless steel 1.4581 for shut-off and throttling, double sealing of the damper stem with profile ring and dew point lock, centric disc bearing, fully isolatable according to the Energy Saving Ordinance - EnEV, CE certification according to the Pressure Equipment Directive for fluids of groups 1 and 2. With drilled stem for optional temperature measurement with THEA (THErmo display).

  • max. differential pressure: 16 bar to DN200 , from DN200 max. 10 bar
  • Nominal pressure: PN 6 / 10 / 16
  • Nominal size: DN25-DN600
  • Operation: with worm gearbox


For cold, warm, hot, water and drinking water ...

Technical Data


Ductile iron GGG 40; EN-JS1030 (0.7040)
Stainless steel disc 1.4581 (alternatively: Slice of EN-JS1030 with zinc flake coating)

Optional EPDM, NBR or FPM Viton


EPDM -10º C to +130º C

NBR -10º C to +80º C

FPM Viton -10º C to +150º C; (FPM Viton: not for hot water usable)


for mounting between flanges according to DIN.
Operating with worm gear

Nominal size:

DN25 - DN500

Nominal pressure:



With DIN DVGW registration DW 6201BR0244, according to DIN EN 1074-1 / -2 including disinfection test, DVGW VP646 and DVGW W270 for potable water. (In the variant EPDM collar and Noble steel disc 1.4581)

Also available in seawater version.


Optional versions are possible.

Request an offer
+49 (0) 2461 91634 00