Oval wedge gate valve Type A-KOI216 - PN16 - GG-25

Type A-KOI216 - PN16 - GG-25

Description - Oval gate valve Type A-KOI216



ACI long pattern wedge gate valves series A-KOI-216 are intended for operation as a stop valve, and not suitable for control applications. The advantage of gate valves compared to globe valves is their straight opening. Our wedge gate valves A-KOI-216 require a very low installation height due to their internal, non-rising stem. Gate valves are sealing in both flow directions.

Wedge gate valves Type A-KOI-216 are built in nominal sizes from DN40 to DN2000. Their design follows the definitions of DIN EN 1074 / EN 1171, previously DIN 3352. EN 558-1 Series 15 (previously DIN 3202-F5) defines the face to face dimensions.

Possible applications include liquid or gaseous media without fibrous or abrasive particles. The highest allowable operating temperature for these gate valves is 150°C. Depending on the operating temperature, the gate valves are suitable for up to 16 bar of operating pressure.

Each gate valve is tested for pressure resilience and leakage after assembly, according to DIN EN 12266 / 1074. Valve body test pressure is 1.5-fold nominal operating pressure, the leakage test is performed with 1.1-fold nominal pressure.

The default body material is grey cast iron GG-25, new identifier EN-GJL 250. Other materials, like spheroidal cast iron GGG40 / EN-GJS-400-15 are available on request. The body and wedge seats are made of brass, the stem of stainless steel 1.4021 / X20Cr13. The stem seal is either a gland seal, which needs to be tightened periodically, or a maintenance free O-Ring seal. The gland seal is usually made of graphite, the O-rings of NBR or EPDM.

Because these gate valves are manufactured from grey cast iron EN-GJL-250, they are only available with flanged connections. Default flange pattern is PN 16 according to DIN EN 1092-1 with sealing faces type B1. Sizes 200 and higher are optionally available with flange drilling according to PN 10.

Flange patterns according to other standards, like ASME B16.5 or JIS, are also available.

Gate Valves Type A-KOI-216 in grey cast iron (GG-25) are delivered with a manual wheel actuator by default.

Available options:

  • Sea water resistant with bronze stem and seats
  • Special corrosion protection for underground installation
  • Machined wedge guide
  • Drain plug
  • Ventilation plug
  • Installation accessories and stem extension

Technical Data

Material:

Body:


GG-25

Seats:


brass

Stem:
Niro

Temperature:

max. 150°C






Form:

Oval wedge gate valve, internal stem, DIN 3352-2H

Face to face dimension:
DIN 3202-F5

Nominal size:

DN 40 - DN 2000

Nominal pressure:

PN16

Options:

  • Sea water resistant with bronze stem and seats
  • Special corrosion protection for underground installation
  • Machined wedge guide
  • Drain plug
  • Ventilation plug
  • Installation accessories and stem extension


Request an offer